AK-750-01 -- Horizontal Move Monitors (Qty.
2) |
385.00 |
- Provides two additional dial
indicators and two magnetic bases
- Accurately measures the actual
horizontal movement. Also used to detect and correct "soft
foot"
- A must to make precision horizontal
moves
- A most useful accessory for
any shaft-alignment system
- Includes:
- (2) Magnetic bases
- (2) Swivel joints 1/4 x 1/4
- (2) Swivel joints 3/8 x 1/4
- (2) Dial indicators, Starrett
No. 196B1
|
 |
|
AK-750-02 -- Chain Clamps (Qty. 2) |
525.00 |
- Can clamp up to 12" diameter.
Unlimited with additional link-ups of chain
- Provides two lengths of 36"-long
tooling chain
- Includes:
- (2) Chain 36" with 3/8-16
bolt
- (2) Knurled knobs, 3/8-16
x 1” O.D.
- (2) Chain T-Clamps, heavy-duty
aluminum
- (2) 3/8 washers
- (2) Swivel pins
- (2) Knurled knobs, ¼-20
- (2) ¼” flat washers
|
 |
|
AK-750-03
-- Small Clamps for Small Machines (Qty. 2) |
545.00 |
- Provides two clamps, ½"-thick
aluminum
- Has small swing radius of
4 inches. Machined curve as a target surface
- Shaft sizes of ½"
to 1½". Designed for small machines and tight spaces
- In many cases, indicator bar
sag can be ignored
- Includes:
- (2) Machined clamps, aluminum,
with plastic knobs
- (4) Swivel clamps ¼
x ¼
- (2) ¼" diameter
extension rods to span 6 inches
- (2) Dial indicators, Starrett
No. 196B1
|
 |
|
BA-100
-- Bearing Alignment Fixture (Qty. 1) |
290.00 |
- Used to check bearing alignment
- Measures the total indicator
runout of outer race to shaft axis
- Clamps to the shaft and measures
on the outer race as the shaft is rotated
- A must for anyone who installs
bearings, especially the adjustable type
- Not available anywhere else
- Includes:
- (1) Holder, 6061 aluminum
- (1) Dial indicator, Starrett
"Last Word" No. 711GPSZ
- (4) Assorted hose clamps
- (1) #10-24 thumb screw, brass
|
 |
| 
1021 Commercial Drive
SE
Rio Rancho, NM 87124
PO Box 66479
Albuquerque, NM 87193-6479
(505) 898-2094
Online Policies | Site Map
Copyright
© 2005 Machine Dynamics, Inc. All Rights Reserved. |
